|
502D board is specifically used for laser marking. Using PCI bus, the marking is fast and stable. With MarkingMate software, it can achieve a variety of combinations. Support the control of lamp pumped , semiconductor ( end-pumped and side-pumped ) , and CO2 laser marking system. It supports Digital galvanometer and supports most of engraving applications as well, like static marking on flat, small spherical surface or small camber surface with complex graph. Some reserved I/O pins could connect with rotary axis device to perform rotary axis marking. 502D is a truly good C/P value card for general laser marking application.
 Dimension: 119.9 x 91.0mm
Support Windows 98/2000/XP/Vista/Windows 7
Default possesses one set of XY2-100 digital galvanometer signal
Optional16 switching outputs (TTL level, DO8 to DO23 with photo coupling isolation) , they can connect with input
signals of pedal switch and other auxiliary equipments(Only 502D + board has this function)
Default has 24 switching outputs, can control auxiliary equipments of laser marking control system, like laser power,
acousto-optic power, rotary axis, XY table, solenoid valve etc
OptionalThere are another optional 8 switching outputs (TTL level, DO16 to DO23 have photo coupling isolation) , they
can connect with input signals of pedal switch and other auxiliary equipments(Only 502P + board has this function)
Default has 8 channels switching inputs (TTL level, DI0 to DI7 with photo coupling isolation), they can connect with
input signals of pedal switch and other auxiliary equipments
Default has 1 PWM signal, the frequency and duty ratio can be set by software, used for acousto-optic modulation and
CO2 laser control
Default has 1 32-bit hardware timer, can be worked with software to perform mark on the fly
Default possesses one IPG dedicated port
Note: This card with MarkingMate software can achieve variety of combinations, like lamp-pumped, DPSS side-pumped,
end-pumped and CO2 laser marking system etc
Warning: 502D doesn’t support hot-plug, or the board will be burnt out
Static Marking
502D could support complex graph editing and import with MarkingMate software to fulfill general laser marking requirement. The excellent C/P value of 502D approaches customers.
Non-flat surface marking (Small spherical surface, camber surface marking)
502D with MarkingMate makes static marking on small spherical and camber surface without deformation through marking compensation to ensure marking quality. The application of this function without any other hardware to make small spherical surface, camber surface marking possible and easy
Rotary axis control and marking
502D has many TTL signal I/O ports which supports the pulse and direction signals of rotary axis device to perform complex rotational marking with MarkingMate, especially for cylinder and disk marking
Automation marking
502D supports conditional and procedural marking with automation control signal ports which support input and output signals of marking to fulfill the need of automation
|
NMC Embedded Laser Marking 
NMC-S marking control
